Remove turn signal & sonar, add RFID auth

Define AUTH_UID and AUTH_UID_SIZE constants.
Introduce motor control pins IN_1‑IN_4 and set them as outputs.
Comment out turn‑signal and sonar pin definitions and related code.
Refactor Display to remove updateDirection functionality.
Extend RFIDReader with reset() and matches() methods; use them to toggle
carEnabled based on RFID authentication.
Update the main loop to operate only when the RFID tag matches the
authorized UID.

Config.h

@@ -4,13 +4,16 @@
 const int SS_PIN = 10;
 const int RST_PIN = 7;
 
-// Kierunkowskazy
+const byte AUTH_UID[4] = {145, 136, 97, 102};
-const int TS_RIGHT = 9;
+const byte AUTH_UID_SIZE = sizeof(AUTH_UID);
-const int TS_LEFT = 8;
 
-// Odległościomierz
+// // Kierunkowskazy
-const int TRIG_PIN = 6;
+// const int TS_RIGHT = 9;
-const int ECHO_PIN = 5;
+// const int TS_LEFT = 8;
+
+// // Odległościomierz
+// const int TRIG_PIN = 6;
+// const int ECHO_PIN = 5;
 
 const long SONAR_MAX_DIST_CM = 400;
 
@@ -25,7 +28,13 @@ const int GEAR_THRESH_HIGH = 682;
 const int LCD_COLS = 16;
 const int LCD_ROWS = 2;
 
-// Silnik
+// Skrzynia biegów
 const uint8_t CLUTCH_PIN = A7;
 const uint8_t BRAKE_PIN = A2;
 const uint8_t THROTTLE_PIN = A3;
+
+// Silniki
+const int IN_1 = 9;
+const int IN_2 = 8;
+const int IN_3 = 4;
+const int IN_4 = 3;

Display.cpp

@@ -45,21 +45,21 @@ void Display::updateGear(char gearChar) {
   _lcd.print(' ');
 }
 
-void Display::updateDirection(bool leftOn, bool rightOn) {
+// void Display::updateDirection(bool leftOn, bool rightOn) {
-  if (leftOn && rightOn) {
+//   if (leftOn && rightOn) {
-    _lcd.setCursor(12, 0);
+//     _lcd.setCursor(12, 0);
-    _lcd.write((uint8_t)CHAR_LEFT);
+//     _lcd.write((uint8_t)CHAR_LEFT);
-    _lcd.print(' ');
+//     _lcd.print(' ');
-    _lcd.write((uint8_t)CHAR_RIGHT);
+//     _lcd.write((uint8_t)CHAR_RIGHT);
-    return;
+//     return;
-  }
+//   }
 
-  unsigned long now = millis();
+//   unsigned long now = millis();
-  bool leftBlink = leftOn && ((now / 1000UL) % 2 == 0);
+//   bool leftBlink = leftOn && ((now / 1000UL) % 2 == 0);
-  bool rightBlink = rightOn && ((now / 1000UL) % 2 == 0);
+//   bool rightBlink = rightOn && ((now / 1000UL) % 2 == 0);
 
-  _lcd.setCursor(12, 0);
+//   _lcd.setCursor(12, 0);
-  _lcd.write((uint8_t)(leftBlink ? CHAR_LEFT_BLINK : CHAR_LEFT));
+//   _lcd.write((uint8_t)(leftBlink ? CHAR_LEFT_BLINK : CHAR_LEFT));
-  _lcd.print(' ');
+//   _lcd.print(' ');
-  _lcd.write((uint8_t)(rightBlink ? CHAR_RIGHT_BLINK : CHAR_RIGHT));
+//   _lcd.write((uint8_t)(rightBlink ? CHAR_RIGHT_BLINK : CHAR_RIGHT));
-}
+// }

Display.h

@@ -19,7 +19,7 @@ public:
 
   void updateGear(char gearChar);
 
-  void updateDirection(bool leftOn, bool rightOn);
+  // void updateDirection(bool leftOn, bool rightOn);
 
 private:
   rgb_lcd _lcd;

Projekt.ino

@@ -3,26 +3,28 @@
 #include "Config.h"
 #include "Display.h"
 #include "Gear.h"
-#include "Sonar.h"
+// #include "Sonar.h"
 #include "RFID.h"
 #include "Engine.h"
 
 Display display;
 GearSelector gear(GEAR_X_PIN, GEAR_Y_PIN, GEAR_THRESH_LOW, GEAR_THRESH_HIGH);
-Sonar sonar(TRIG_PIN, ECHO_PIN, SONAR_MAX_DIST_CM);
+// Sonar sonar(TRIG_PIN, ECHO_PIN, SONAR_MAX_DIST_CM);
 RFIDReader rfid(SS_PIN, RST_PIN);
 Engine engine(THROTTLE_PIN, CLUTCH_PIN, BRAKE_PIN);
 
-bool leftBlink = false;
-bool rightBlink = false;
-
 unsigned long prevUpdate = 0;
 
+bool carEnabled = false;
+
 void setup() {
   Serial.begin(9600);
 
-  pinMode(TS_LEFT, INPUT);
+  // pinMode(TS_LEFT, INPUT);
-  pinMode(TS_RIGHT, INPUT);
+  // pinMode(TS_RIGHT, INPUT);
+
+  pinMode(IN_1, OUTPUT);
+  pinMode(IN_2, OUTPUT);
 
   rfid.begin();
   display.begin(LCD_COLS, LCD_ROWS);
@@ -30,12 +32,25 @@ void setup() {
 }
 
 void loop() {
+  bool check = rfid.check();
+  bool matches = rfid.matches(AUTH_UID, AUTH_UID_SIZE);
+
+  bool rfidOk = check && matches;
+
+  if (rfid.check() && rfid.matches(AUTH_UID, AUTH_UID_SIZE)) {
+    delay(3000);
+    carEnabled = !carEnabled;
+  };
+
+  if (carEnabled) {
+    Serial.println("Działa");
+
     if (gear.update())
       display.updateGear(gear.getGearChar());
 
-  display.updateDirection(
+    // display.updateDirection(
-    digitalRead(TS_LEFT),
+    //   digitalRead(TS_LEFT),
-    digitalRead(TS_RIGHT));
+    //   digitalRead(TS_RIGHT));
 
     unsigned long now = millis();
     float dt = (now - prevUpdate) / 1000.0f;
@@ -46,10 +61,7 @@ void loop() {
       display.updateSpeed(engine.getSpeedKmh());
     }
 
-  long dist = sonar.measure();
+    // long dist = sonar.measure();
     // Serial.println(dist);
-
-  if (rfid.check()) {
-    rfid.printUID();
   }
 }

RFID.cpp

@@ -11,18 +11,30 @@ void RFIDReader::begin() {
 bool RFIDReader::check() {
   if (!_rfid.PICC_IsNewCardPresent()) return false;
   if (!_rfid.PICC_ReadCardSerial()) return false;
+  // _rfid.PICC_HaltA();          // stop the tag
+  // _rfid.PCD_StopCrypto1();     // clear RC522 crypto
+  return true;
+}
 
+void RFIDReader::reset() {
   _rfid.PICC_HaltA();
+  _rfid.PCD_StopCrypto1();
+}
+
+bool RFIDReader::matches(const byte* expectedUid, byte expectedSize) const {
+  if (_rfid.uid.size != expectedSize) return false;
+  for (byte i = 0; i < expectedSize; ++i) {
+    if (_rfid.uid.uidByte[i] != expectedUid[i]) return false;
+  }
   return true;
 }
 
 void RFIDReader::printUID() const {
-  Serial.print(F("RFID Tag UID:"));
+  Serial.println(F("RFID Tag UID:"));
-  for (byte i = 0; i < _rfid.uid.size; i++) {
+  // for (byte i = 0; i < _rfid.uid.size; i++) {
-    Serial.print(_rfid.uid.uidByte[i] < 0x10 ? " 0" : " ");
+  //   Serial.print(_rfid.uid.uidByte[i] < 0x10 ? " 0" : " ");
-    Serial.print(_rfid.uid.uidByte[i], HEX);
+  //   Serial.print(_rfid.uid.uidByte[i], HEX);
-  }
+  // }
-  Serial.println();
 }
 
 const byte* RFIDReader::getUID() const {

RFID.h

@@ -10,8 +10,12 @@ public:
 
   bool check();
 
+  void reset();
+
   void printUID() const;
 
+  bool matches(const byte* expectedUid, byte expectedSize) const;
+
   const byte* getUID() const;
   byte getUIDSize() const;